NEFF T27PIQ4S0 N70 75cm 5 Burner Gas-on-Glass Hob Wok Burner Black

Design

• tempered glass surface, black
• Two built-in options:
• - Flush installation
• - Surface mounted installation: install the hob either flush or slightly raised on the worktop
• Cast iron pan supports with rubber feet

Usage convenience

• FlameSelect with 9 steps: precisely control and adjust the flame in nine defined levels.
• Design co-ordinated control dials, front: easily access dials in front with strong grip for effortless turning.
• Ignition via control dials: just push and turn the dials to ignite the flame.

Burners and power

• 5 burner hob
• Left front: Economy burner up to 1 KW (depending on gas type)
• Left rear: Standard burner up to 1.75 KW (depending on gas type)
• Center front: Wok burner up to 4 KW (depending on gas type)
• Right rear: High speed burner up to 3 KW (depending on gas type)
• Right front: Standard burner up to 1.75 KW (depending on gas type)

Cleaning

• Removable control dials for easy cleaning between knobs.
• Dishwasher suitable pan supports for easy cleaning.
• Cast iron pan supports with rubber feet: little weight and compact form, yet high stability due to continuous surface.

Safety

• Flame failure safety device: prevents unwanted gas flow when flame goes out.

Installation (gas types & measurements)

• Usable for: Nat gas L/LL G25/20mbar(DE)
• NG H/E 20mbar, E+ 20/25mbar
• Natural gas H 25 mbar (HU)
• Natural gas L 25 mbar (NL)
• Liquid gas G30,31 28-30/37mbar
• Liquid gas G30 37 mbar (PL)
• Liquid gas 50 mbar
• Factory set for connection to mains gas
• Nozzle set for LPG jets (28-30/37mbar) included. Nozzles for all other gas types can be ordered via the customer service. For nozzle change, please contact the customer service.
• Dimensions of the product (HxWxD mm): 54 x 752 x 520
• Required niche size for installation (HxWxD mm) : 45 x 560 x (480 - 490)
• Min. worktop thickness: 20 mm
• If installed flush, minimum worktop thickness is 30mm.
• Power cord: 1 m
• Connected load: 11.5 KW